In Blokify
Inspect the model
- Rotate it and look from every side.
- Confirm intended parts are connected.
- Remove accidental or hidden blocks.
- Check that important details are not too small.
After export
Verify the file
- Open it in the intended receiving tool.
- Confirm the complete model appears.
- Check dimensions and units.
- Choose an orientation with a stable base.
In the slicer
Review the print
- Select the correct printer and material.
- Inspect overhang and support recommendations.
- Preview layers from bottom to top.
- Follow the printer maker’s safety guidance.
Troubleshooting
If the preview does not match the idea
A piece is missing
Return to the model and check whether that piece was connected as intended, then export a fresh file.
The size is surprising
Verify units and dimensions in the slicer before changing any printer setting.
The model needs many supports
Try a different orientation or revise unsupported areas in the model. Compare layer previews before deciding.